Automatically add/remove images/figures to the outline tree. Also support the views that are created via the View Manager or use 3d mouse to orient the model before taking the image/figure

Preview to automate the setup for additive manufacturing process simulation using the MAPDL thermal-structural solution. Require ANSYS Enterprise and an ANSYS Additive Suite license. Please contact your sales representative for an evaluation license

Create fluid enclosure and decompose it to sweepable bodies [Contains source code]

Creates 1D Springs (COMBIN14 elements) either with a longitudinal or torsional behavior

Allow to use a .csv file to import analysis settings for time stepping [Contains source code]

Expose Topology Optimization capabilities in Workbench Mechanical.Optimized model can be exported and edited in SpaceClaim for performing validation study and/or 3D printing

Convert .csv file to Fluent profile setting to check time dependent condition graphically in this wizard and set it as Fluent profile

Automate shape optimization using adjoint solver

Give the users the ability to install and use the ANSYS Battery Design Toolkit in Simplorer

Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results

Enable to apply a varying load on beam elements

Convert line bodies defined in Workbench to cables, trusses or compression only elements using link180 elements